HOME

W75F Secure Memory Element

W75F Secure Flash Solution is the first secure flash memory device to gain a Common Criteria (CC) EAL 5+ certificate. W75F enables secure eXecute-in-Place (XiP) and protects confidentiality and integrity of code / data in IoT devices. Application usage case include, but not limited to integrated UICC, integrated Secure Element, Artificial Intelligence (AI) platforms, integrated Hardware Security Modules (HSM) for automotive subsystems. The W75F provides the industry’s most secure external storage for code and data. It offers a dependable solution for manufacturers of connected devices who want to defend their products against threats such as replay, roll-back, man-in-the-middle, sniffing, side-channel and fault injection attacks. 

In 2020, W75F has achieved PSA Certified™ Level 2 ready in the PSA Certified independent security assurance scheme, also obtained ISO 26262 ASIL-D ready and SESIP Level 3 certificate with physical and software attacker resistance.

With PSA Certified™ Level 2 ready and the certificates aforementioned, W75F not only can provide a secure, certifiable, and flexible memory sub-system complementary to Arm®v8-M architecture-based systems, but also can ensure the security for IoT, automotive and Artificial Intelligence (AI) platforms. This enables SoC and MCU vendors to design secure and certifiable solutions while expediting time to market.

 

W75F Secure Flash Solution is the first secure flash memory device to gain a Common Criteria (CC) EAL5+ certificate.
 
W75F Secure Flash Solution is the first secure flash memory device to gain a Common Criteria (CC) EAL5+ certificate.
 
 In-band integrity check protects the interface
  • The world's first Secure Flash device with Common Criteria EAL 5+, PSA Certified™ Level 2 ready, SESIP Level 3 with physical attack and software attacker resistance and ISO 26262 ASIL-D ready certified
  • Bolt-on security for IoT, automotive and artificial intelligence (AI) platforms
  • Complementary solution for Arm®v8-M and Arm®v8-A TEE sub-system
  • In-band integrity check protects the interface
  • Flexible secure memory architecture

The TrustME® W75F Secure Memory Element Features:

─Advanced Security

  • Common Criteria EAL 5+ certified
  • PSA Certified™ Level 2 Ready Certified
  • SESIP Level 3 + Physical Attack Resistance and Software Attacker Resistance: Isolation of Platform
  • ISO 26262 ASIL-D Ready Certified
  • ISO 21434 Automotive Cybersecurity certification (in progress)
  • Secure eXecute-in-Place (XiP)
  • Tamper and SCA/DPA Resistant Secure Flash Device
  • Code and Data Confidentiality and Integrity
  • Mutual Authentication with SoC
  • Secure standard/Quad/Octal SPI
  • Support shared memory architecture for Multiple-Domains
  • Support AEC-Q100 with AG2 qualification available or upon request
  • Trusted Computing Group (TCG) DICE Compliance
  • 21 MByte/sec secured and authenticated throughput
  • 100,000 program/erase cycles
  • 20-year data retention

─Low Power, Wide Temperature Range

  • Single 1.65 to 1.95V supply
  • 2mA active current, <1μA Power-down
  • -40°C to +105°C operating range

Density

Part No. Voltage Speed Temp. Features Status Industrial
Datasheet
Automotive Industrial
W77Q32JW 1.7-1.95V 104MHz -40℃ ~ 85℃ /
-40℃ ~ 105℃
  • Secure Root of Trust (RoT) for IoT devices
  • Secure code and data storage
  • Secure Over-The-Air (OTA) firmware update with rollback protection
  • Platform firmware resiliency assurance
  • Local and remote secure-channel, encrypted, authenticated, replay-protected
  • Security certifications: Common Criteria EAL 2+, SESIP Level 2 (with IEC 62443 and NIST 8259A ready), ISO 21434, FIPS 140-3 CAVP and safety qualification: ISO 26262 ASIL-C ready
  • Other standard features are fully compatible with W25Q32JW.
UD P pdf
W77M26FJW 1.7-1.95V 104MHz -40℃ ~ 85℃
  • Secure Root of Trust (RoT) for IoT devices
  • Secure code and data storage
  • Secure Over-The-Air (OTA) firmware update with rollback protection
  • Platform firmware resiliency assurance
  • Local and remote secure-channel, encrypted, authenticated, replay-protected
  • Security certifications: Common Criteria EAL 2+, SESIP Level 2 (with IEC 62443 and NIST 8259A ready) and FIPS 140-3 CAVP.
P pdf

Technical Documentation

Resources

Technical Article

>> All Technical Article
Contact us

Copyright © Winbond All Rights Reserved.

This website uses cookies to ensure you get the best experience on our website. Learn more
OK