HOME

Quality Management

Quality Management Program

The purpose of Quality Management Program at Winbond is to establish the controls needed to assure that the quality and reliability of our VLSI products fully satisfy our customers. We strive to deliver competitive products free from defects and to provide our customers with prompt, professional service. Our Quality Management Program focuses on three major areas: quality control, reliability assurance, and failure analysis.

Quality Control

Winbond has implemented a series of quality control functions that cover all the steps in manufacturing process. The main steps in this quality control procedure are:

Constant monitoring on all steps in the manufacturing process and information feedback at all levels allow fast and efficient detection of problems, evaluation and analysis, and corrective measures. We emphasize that each step in the manufacturing process should be undertaken with a "Do it right at the first time" attitude and must produce a defect-free output. The over-all result is a line of high-quality, reliable products.

Reliability Assurance

At Winbond, the aim of reliability assurance testing is to assure high-level product performance throughout the intended life of the products. Each manufacturing phase is subject to continuous review, analysis, and evaluation, with modifications introduced to further improve quality and reliability. Our reliability system is based on three important sources of reliability data:

Failure Analysis

Failure analysis, which determines the cause of product failures and proposes corrective action, is an important part of reliability assurance. At Winbond, scanning electron microscopes, diagnostic probe stations, optical microscopes, and many other precision instruments are used to perform failure analysis on devices submitted from various sources. Defective ICs are logged into the laboratory for inspection and for preparation of corrective action reports.

Packaging Technology And Subcontractor Management

Winbond works closely with assembly subcontractors to provide the best possible package form to maximize a device's performance and to meet customer's special demands. Our extensive subcontractor selection, qualification, and management program is strictly followed to insure the delivery of high-quality products from our subcontractors. In addition, Winbond conducts a rigid program to monitor package reliability which helps to insure the mechanical integrity of every package type produced by each production facility.

Quality Assurance Flowchart

Contact us

Copyright © Winbond All Rights Reserved.

This website uses cookies to ensure you get the best experience on our website. Learn more
OK