32Mb serial NOR and 1Gb serial NAND are assembled with single 8-pin package which NOR is default selected after power up. Easily boot up from NOR. Continuous Read Mode is defualt for NAND and Qual Read is default for NOR.

• Features

  [NOR]
  Single/Dual/Quad SPI operations
  Uniform 4KB erasable sectors & 32KB/64KB erasable blocks
  16,384 pages (256 bytes), page program in 0.7mS (typ.)
  Continuous Read with 8/16/32/64 Byte Wrap
  Clock operation up to 104MHz (208/416MHz equivalent with Dual/Quad SPI)
  2.7 to 3.6V power supply
  4mA active read current,<1μA power down current
  -40° to +85°C operating range
  Program/Erase Suspend/Resume, Suspend Status Bit
  Factory-programmed unique ID
  Electronic ID with Dual/Quad SPI, Hardware and software write protection for top or bottom blocks
  Volatile & Non-volatile Status Register Bits
  Lock-Down and OTP protection
  Serial Flash Discoverable Parameters (SFDP)
  3X256byte Security Registers with OTP locks
  Complement Array Protection Bit
  Individual Block/Sector Write Protection
  Software Reset
  Programmable output driver strength
  [NAND]
  Vcc: 2.7V to 3.6V
  Bus width: x1/x2/x4
  Operating temperature: Industrial: -40°C to 85°C
  Single-Level Cell (SLC) Technology
  Density: 1G-bit/128M-byte
  Page size: 2,112 bytes (2048 + 64 bytes)
  Block size: 64 pages (128K + 4K bytes)
  Page read with ECC eable: 50us
  SPI clocks: 104MHz
  Page program time: 250us(typ.)
  Black erase time: 2ms(typ.)
  Support OTP memory area

Package

WSON8 8x6, SOIC16 300mil