HOME /Application /Mobile / Networking

Mobile / Networking

Winbond Serial Flash devices are being used on mobile devices such as mobile phones and tablets in addition to products used on other portable applications such as notebooks, Hard Disk Drives, Solid State Drives, Bluetooth and WiFi modules, MP3 players, smart watches, games, digital radio, toys, DECT phones, cameras, digital photo album, GPS and automotive.

We offer tiny packages that are very convenient to use in space constrained applications as shown here.

Serial Flash products from 512Kb through 128Mb densities are available in 8-pin packages with low profile with a maximum height of 1mm. The WSON package comes in 6x5mm and 8x6mm packages, whereas the USON package comes in 2x3mm, 4x3mm and 4x4mm sizes. The WLBGA packages are the tiniest of the lot which are about the size of the dies used for these packages. All these packages have been designed in on multiple applications and are being purchased in significant volume.

ProductDensityI/OBallTypeDimension (mm^2)Remark
LPSDR 128Mb - 1Gb X16 54 BGA 8x9 JEDEC standard
LPSDR 128Mb - 1Gb X32 90 BGA 8x13 JEDEC standard
LPDDR 128Mb - 1Gb X16 60 BGA 8x9 JEDEC standard
LPDDR 128Mb - 1Gb X32 90 BGA 8x13 JEDEC standard
LPDDR2 256Mb - 2Gb X16 / X32 168 PoP 12x12 JEDEC standard
LPDDR2 256Mb - 2Gb X16 / X32 134 BGA 10x11.5 JEDEC standard
pSRAM 64Mb- 256Mb X16 54 BGA 6x8 -

Winbond Mobile RAM provides completed solution as the memory buffer for Baseband modem, Image Sensor Processor, wearable device, and variety Mobile Wireless products.

Memory plays a key role in networking applications such as Passive Optical Network, Digital Subscriber Line, Switch, Wireless Access Point, Cable Modem, and so on. Winbond Memory Solutions have great quality, compatibility with well-known SoC suppliers’ solutions.

Smart phone

The major challenge of portable device designs are tighten power consumption and required reaction time. Winbond Mobile RAM is the right solution especially for Mobile Phone design with providing low voltage, excellent power saving, and high speed

Wearable device

For wearable device application, Winbond Mobile RAM provides low standby current and deep power down feature to effectively extend the battery life of a wearable device. And Known Good Die for SiP solution to fit small form factor is highly suggested.

Passive optical network

PON is a telecommunications network that uses point-to-multipoint fiber to the premises in which unpowered optical splitters are used to enable a single optical fiber to serve multiple premises.

Digital Subscriber Line (xDSL)

Digital subscriber line (DSL, originally digital subscriber loop) is a family of technologies that provide Internet access by transmitting digital data over the wires of a local telephone network. . Winbond is the top player in this application with full product breadth, high-quality level and cost-effective memory solutions.

Network Switch / HUB

A network switch (sometimes known as a switching hub) is a computer networking device that is used to connect many devices together on a computer network. Winbond’s high performance memory solutions are widely in top tier brands.

Wireless Access Point (WAP)

WAP is a device that allows wireless devices to connect to a wired network using Wi-Fi, or related standards. Winbond has been in this application since SRAM era. With completed solutions, full compatibility test, high EMI performance, and high industrial-temp quality, Winbond is a key supplier in this application.

Cable Modem

A cable modem is a type of network bridge and modem that provides bi-directional data communication via radio frequency channels on a hybrid fibre-coaxial (HFC) and RFoG infrastructure. Winbond is a key supplier in this application.

Power-Line Communication (PLC)

Power-line communication (PLC) carries data on a conductor that is also used simultaneously for AC electric power transmission or electric power distribution to consumers.